Fuel splash-stop & vent line - for fuel filling hose 51 mm - vent - 19 mm
The fuel Splash-stop is connected right under the deck filler plate to ensure that overflowing fuel or foam cannot flood onto the deck. The excess diesel* or petrol fuel is collected in a parallel hose which functions as a reservoir, returning the fuel back into tank.
The fuel Splash-stop is connected right under the deck filler plate to ensure that overflowing fuel or foam cannot flood onto the deck. The excess diesel* or petrol fuel is collected in a parallel hose which functions as a reservoir, returning the fuel back into tank.
The capacity of the reservoir is determined by the length and diameter of the hose (see 3 types below). The housing and hose connection are made of anodized aluminium. The fill and vent lines, hose clamps and a matching stainless steel (AISI 316) deck entry should be ordered separately. The fuel Splash-Stop meets all the latest CE (ISO 7840 and ISO 10088) and ABYC standards.
A no-smell filter (for diesel only) can be fitted in the tank breather line to prevent unpleasant smells. If the filter is located well above the deck entry, the breather line may exit lower than the deck level if required. To prevent expensive fuel theft, we recommend placing
For use outside the engine room only!
• Filler hose connection Ø51 mm
• Breather connection Ø19 mm
Manufacturer | Vetus |
---|---|
Dimensions (length x width x height) (mm) | 146 x 86 x 121 |
Vent hose diameter (mm) | 19 |