The ultrasonic level sensor, SENSORA is contactless and will measure the fluid level in any shape of tank. It is suitable for use with: petrol, diesel fuel, drinking water, black and grey waste water.
After installation, the sensor can be calibrated very easily with the aid of a LED and a calibration wire, no other equipment is required. The sensor may be installed in any shape of tank, regardless of its dimensions, but with a maximum depth of 120 cm. When fitting an ultrasonic sensor to a VETUS fuel tank filler kit type FTKIT, adaptor SENSORSR must also be ordered. The sensor may be connected to all standard VETUS analogue level indicators
Please note: that the SENSORA will not work in metal tanks
• Voltage: 12 and 24 Volt D.C.
• Current consumption: 35 mA
• Interface: Analogue
• Tank depth: 120 cm
• Accuracy : + / - 5%
• Temperature range: - 20 to + 70°C
• Flange: SAE, 5 holes
• Dimensions: Ø 77 x 23 mm
Manufacturer | Vetus |
---|---|
Accuracy | +/- 5% |
Voltage (Volt) | 12 and 24 V |
Interface | Analogue |
Current consumption (A) | 35 mA |
Temperature (°C) | 0°C to + 70°C |
Tank depth (mm) | 1200 |
Dimensions (length x width x height) (mm) | 77 x 23 |
Flange | SAE, 5 holes |
Tank depth (inches) | 47 1/4 |
Temperature (°F) | 32°F to + 158°F |