The ultrasonic level sensor, SENSORB for indication via bus system is contactless and will measure the fluid level in any shape of tank. It is suitable for use with: petrol, diesel fuel, drinking water, black and grey waste water.
After installation, the sensor can be calibrated very easily with the aid of a LED and a calibration wire, no other equipment is required. The sensor may be installed in any shape of tank, regardless of its dimensions, but with a maximum depth of 120 cm. When fitting an ultrasonic sensor to a VETUS fuel tank filler kit type FTKIT, adaptor SENSORSR must also be ordered. The sensor may be connected to all standard VETUS analogue level indicators• Voltage: 12 and 24 Volt D.C.
|Temperature (°C)||0°C to + 70°C|
|Tank depth (mm)||1200|
|Dimensions (length x width x height) (mm)||77 x 23|
|Temperature (°F)||32°F to + 158°F|
|Tank depth (inches)||47 1/4|
|Flange||SAE, 5 holes|
|Interface||Bus (RS485 bus).|
|Current consumption (A)||35 mA|
|Voltage (Volt)||12 and 24 V|
|Dimensions (length x width x height) (inches)||3 3/64 x 29/32|