Ultrasonic level sensor 12/24V, for analogue indication of water, fuel and waste levels

EUR141.10 EUR174.20
In stock
SKU
SENSORA
• The ultrasonic level sensor, SENSORA is contactless and will measure the fluid level in any shape of tank. It is suitable for use with: petrol, diesel fuel, drinking water, black and grey waste water.

The ultrasonic level sensor, SENSORA is contactless and will measure the fluid level in any shape of tank. It is suitable for use with: petrol, diesel fuel, drinking water, black and grey waste water.

After installation, the sensor can be calibrated very easily with the aid of a LED and a calibration wire, no other equipment is required. The sensor may be installed in any shape of tank, regardless of its dimensions, but with a maximum depth of 120 cm. When fitting an ultrasonic sensor to a VETUS fuel tank filler kit type FTKIT, adaptor SENSORSR must also be ordered. The sensor may be connected to all standard VETUS analogue level indicators

• Voltage: 12 and 24 Volt D.C.
• Current consumption: 35 mA
• Interface: Analogue
• Tank depth: 120 cm
• Accuracy : + / - 5%
• Temperature range: - 20 to + 70°C
• Flange: SAE, 5 holes
• Dimensions: Ø 77 x 23 mm
More Information
Temperature (°C) 0°C to + 70°C
Tank depth (mm) 1200
Dimensions (length x width x height) (mm) 77 x 23
Temperature (°F) 32°F to + 158°F
Tank depth (inches) 47 1/4
Flange SAE, 5 holes
Accuracy +/- 5%
Interface Analogue
Current consumption (A) 35 mA
Voltage (Volt) 12 and 24 V
Dimensions (length x width x height) (inches) 3 3/64 x 29/32
Write Your Own Review
You're reviewing:Ultrasonic level sensor 12/24V, for analogue indication of water, fuel and waste levels
Your Rating