Inspection port with flange-in-ring - universal post for diesel, water, and wastewater tanks

Rating:
100% of 100
EUR57.68 EUR66.30
In stock
SKU
ILT120

Innovative inspection port with robust design

The standard delivery of the VETUS ILT is an innovative port with flange-in-ring design which facilitates easy opening, inspecting and cleaning the tank, even after being closed for a long time. The inspection port has a counter flange and a rubber seal which are inserted into a Ø 159 mm hole in the tank. All that needs to be done is tighten the 4 supplied bolts which compresses the rubber seal to ensure perfect sealing.

The “clamp and seal” design simplifies installation, making the drilling of a Ø 159 hole the hardest part in the installation! It doesn’t stop there however, because the sealing mechanism of the inspection lid (in the standard scope of supply) will put the pressure only on the outer rim, while not having to compensate for the friction when opening for inspection!

Not only does it solve the MANDATORY requirements stated in INTERNATIONAL STANDARD ISO/FDIS 21487: “Diesel tanks shall be equipped with inspection hatch(es) having a suitable diameter of at least 120 mm at suitable position(s) for cleaning and inspection of the lowest part(s) of the tank.” It does so while all connections can stay in place!

The black blind plate can be replaced by connection kits for water (ILTCOND), waste(ILTCONW) and diesel (ILTCONF38)

  • Hight above deck: 40 mm
  • Overall diameter:  190 mm
  • Cutout dimension: 159 mm
More Information
Diameter (mm) 120 x 159
Cut-out diameter (mm) No Data
Diameter (inches) 4 23/32 x 6 17/64
Cut-out diameter (inches) No Data
Write Your Own Review
You're reviewing:Inspection port with flange-in-ring - universal post for diesel, water, and wastewater tanks
Your Rating