Facebook Pixel

Fuel connection incl. inspection hatch and hole saw

In stock
Item No
ILT120-CONDF
Grouped product items
Image Product Name Qty
Inspection port Ø120 mm- universal post for diesel and wastewater tanks
EUR87.10
Connection kit fuel 38mm
EUR64.35
Ø 159mm hole saw for plastic, G.R.P. or stainless steel (AISI 316) tanks
EUR27.95
90 dg. Ø38mm hose connnection for ILTCOND, ILTCONW & ILTCONF38
EUR16.21
EUR179,40

This set inclused the Innovative inspection port, fuel connection and hole saw

Vetus ILT120 inspection hatch
The standard delivery of the VETUS ILT is an innovative port with flange-in-ring design which facilitates easy opening, inspecting and cleaning the tank, even after being closed for a long time. The inspection port has a counter flange and a rubber seal which are inserted into a Ø 159 mm hole in the tank. All that needs to be done is tighten the 4 supplied bolts which compresses the rubber seal to ensure perfect sealing.

The “clamp and seal” design simplifies installation, making the drilling of a Ø 159 hole the hardest part in the installation! It doesn’t stop there however, because the sealing mechanism of the inspection lid (in the standard scope of supply) will put the pressure only on the outer rim, while not having to compensate for the friction when opening for inspection!

The black blind plate is replaced by connection kits for fuel

Fuel connection kit type ILTCONF38
This fuel connection disc will take care of all fuel related connections

  • Ø 38 mm fuel fill connection
  • Ø 8 / 10 mm fuel suction connection
  • Ø 8 / 10 mm fuel return connection
  • Suction-/return tube 80 cm
  • Ventilation connection Ø 16 mm
  • 5 hole SAE flange tank level sensor connection
  • Ø 8 mm suction connection for marine diesel heaters

Ilt 120 with connections kit specifications

  • Hight above tank to top of Ø38mm hose connector: 85mm
  • Hight above tank to top of fuel connections: 67mm
  • Hight above tank to top of Ø38mm 90 dg. hose connector: 82mm  (this is not includede but can be purchased as assesories)
  • Overall diameter:  190 mm
  • Cutout dimension: 159 mm

The ILTCON connection set is delivered as standard with a Ø38mm straight hose connection - on some installations a 90 degree Ø38mm hose connection must be used, either as a replacement for the one that comes with the set, or as an extra connection.
This Ø38mm 9 degree hose connection is available with item no. ILTCON90

More Information
Manufacturer Vetus
Diameter (inches) 4 23/32 x 6 17/64
Diameter (mm) 120 x 159
Cut-out diameter (mm) No Data
Cut-out diameter (inches) No Data